Boiler maintenance services with Thermea equipment
Best boiler maintenance experts DubaiBoiler Maintenance Experts DubaiBoiler Repair Services Dubai

Boiler maintenance services with Thermea equipment

When it comes to boiler repair services Dubai the one name that you can rely on is Thermea equipment. And with the help of the blog, we help you explore more about the following topics – 

  • When to contact a service company for boiler repair or maintenance?
  • The reasons for getting your boiler serviced.
  • Types of routine boiler maintenance. 
  • How annual maintenance is carried out?

The maintenance of the boiler is something that one should pay close attention to. 

Here’re a few of the conditions that will help you understand the time to offer repair or maintenance to your boiler. 

  • If your feedwater temperatures drop below its recommended temperatures i.e 190 F for hot water tanks or 225 F for deaerators.
  • When the feedwater conductivity is above the suggestion given by your water treatment company.
  • If the boiler water conductivity is above the limit given by your water treatment company.

The above listed are some of the most common scenarios to understand that time has come to contact a service company for boiler repair or maintenance. 

Why should one repair the boilers?

Here’re the reasons that will help you understand the benefit or the reason for getting your boiler serviced. 

  • With regular boiler maintenance by detecting & resolving problems at the early stage before it gets too late helps you reduce the overall cost of maintenance 
  • Safety tests performed on regular intervals help you prevent deaths from carbon monoxide poisoning & other deadly boiler operating scenarios.
  • As most of the boiler insurance & warranties policies require annual servicing to provide coverage and by doing servicing it helps you to stay under insurance coverage and under warranty.
Types of routine boiler maintenance – 
  • Daily Maintenance
  • Weekly Maintenance
  • Monthly Maintenance
  • Annual Maintenance

The above listed are the 4 types of maintenance that can help you maintain your boiler at the best condition for the maximum time. 

If you want to know more about each type of maintenance procedures please leave a comment in the comments section. We’ll share a new read on the same. 

But, here under this blog, we’ll help you with details on annual maintenance?

Let’s explore how annual maintenance is carried out –

  • Disassembling & checking the LWCO and ALWCO for sludge, corrosion or any kinds of electrical switch defects is the first step for the same.  
  • After executing the first step you can go for verifying & tuning up of your burners and it’s settings. Getting quarterly tuning under the supervision of a qualified technician is a healthy practice.  
  • Inspection of the fireside & waterside for any kind of damage for scale or corrosion & to clean the boiler inside and out.
  • Hydro test boiler for leaks (tube joints and piping).
  • Inspect all refractors for fallen broken chunks.
  • Check gas regulator pressure settings.
  • Replace or re-certify safety valves.
  • Bubble test fuel train safety shut-off valves.
  • Hydro test boiler for leaks (tube joints and piping).
  • Inspect all refractors for fallen broken chunks.
  • Check gas regulator pressure settings.
  • Replace or re-certify safety valves.
  • Bubble test fuel train safety shut-off valves.

For any kind of annual maintenance or boiler repair services in Dubai, visit Thermea equipment.

Contact us

Warehouse no. 7,

Al Manama Street,  Ras Al Khore 2, Behind Tasheel.

Contact Details  – +9714 2721721, +971 58 179 5189 , +971 55 285 1772

Send your quires to – info@thermea-equipment.com

sales@thermea-equipment.com 

Health benefits of using water boilers

Previous article

Get to know solar water heaters in Dubai

Next article

You may also like

Comments

Leave a reply

Your email address will not be published. Required fields are marked *